XF75IL Cross Flow "Herringbone" Film Fill Media with Integrated Inlet Louver

XF75IL Cross Flow Herringbone Film Fill Media with Integrated Inlet Louver

AccuPac® Cross Flow Herringbone Inlet Louver Fills combine an inlet louver with the high thermal performance of the XF75 herringbone cross flow fill pack.

Features and Benefits
• Integrated inlet louvers eliminate "splash out"
• Superior air/water management for high thermal performance
• Engineered “herringbone” surface for even water distribution
• Honeycomb bonded edges on the air inlets and outlets
• Interlocking offsets space the sheets and form a pack that is strong enough to be stacked one on top of another. In these applications (towers with fill heights over 10 ft [3050 mm]), Brentwood recommends the use of AccuGrid panels at the interface.
• Bottom-supported for durability and ease of installation

Applications
The XF75 IL is an integrated inlet louver with fill section for use with XF75 media.

Product Dimensions

SURFACE AREA	SHEET SPACING	FLUTE ANGLE	SHEETS PER FT.	MEDIA PACK SIZES: Depth (D), Width (W), Length (L)
				Minimum	Maximum	Standard
51 ft2/ft3 (167.4 m2/m3)	19 mm	NA	16	D: 24 in (610 mm) W: 6 in (153 mm) L: 2 ft (610 mm)	D: 24 in (610 mm) W: 12 in (305 mm) L: 10 ft (3050 mm)	D: 24 in (610 mm) W: 12 in (305 mm) L: 4 ft (1220 mm), 6 ft (1829 mm), 8 ft (2439 mm) or 10 ft (3048 mm)
				Standing Height (H) = L x .996

Product Weights

NOMINAL GAUGE		DRY WEIGHT
mils	mm	lbs/ft3	kg/m3
10	0.25	1.7	27.2
15	0.38	2.4	38.4

Brentwood sheet thicknesses are quoted in final gauge (as measured in field) of .008” (.203 mm), .010” (.254 mm), .015 (.381 mm), or your specific requirement. All Brentwood fill products are available in PVC and are UV stabilized. The PVC compounds used in Brentwood fills have outstanding resistance to weather exposure and are nearly impervious to chemical degradation by alkali, acids, greases, fats, oils, and biological attack. Brentwood PVC has excellent fire rating due to its self-extinguishing characteristics, and meets or exceeds Cooling Tower Institute Standard 136. HPVC (high temperatures), PP (polypropylene), and ABS plastics are also available for special applications.